RCA PRO807 owner manual Powering Your Camcorder, Using the Adapter/Charger to Power Your Camcorder

Powering Your Camcorder

Using the Adapter/Charger to Power Your Camcorder

The adapter/charger attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery. You may need a plug adapter in some countries. Consult your RCA dealer. Be sure to purchase the plug adapter before traveling. The adapter can be hard to find in foreign countries.

			POWER
		.	ADJ
		DATE/TIME
	.	RES
MEM	COUNTER

OPEN

DC OUT Jack

REC

START/

STOP

POWER ON

SAVE

DC IN 6.5V

DC IN 6.5 V Jack

REFRESH

CHARGE POWER

DC Power Cord

To AC 110-240V, 50/60 Hz POWER Indicator

To Attach the Adapter/Charger

1.Plug one end of the DC power cord into the DC OUT jack on the adapter/charger.

2.Plug the other end of the DC power cord into the DC IN 6.5V jack on the back of the camcorder.

3.Plug the adapter/charger’s plug into the nearest AC outlet (100-240V, 50/60Hz).

4.If the adapter/charger is properly connected, its POWER indicator will light.

To Remove the Adapter/Charger

1.Unplug the adapter/charger from the wall outlet.

2.Disconnect the DC power cord from the camcorder and the adapter/charger.

Using an optional plug adapter

An optional plug adapter may be required in some countries.

Optional AC

AC 200-240V

Plug Adapter

1.Plug the adapter/charger’s plug into the AC plug adapter.

2.Plug the AC plug adapter into an AC outlet.

16