Titler
The titler can store a title page in memory that can be displayed and recorded at any time. The
CAM/OFF/VCR Switch
PLAY Button
F | FOCUS |
|
| N |
|
|
| DATE/TITLE |
| PLAY |
|
REW |
| DISPLAY |
EDIT |
| |
| SEARCH | F.F. |
| STOP | |
T
W
OPEN
DCIN 6V
REW | F.FWD F.FWD | ||
REW Button |
| Button | |
STOP | PLAY |
| |
STOP Button |
| PLAY Button | |
|
| ||
A/V DUB | PAUSE |
| |
DISPLAY RECORD | PAUSE/ | ||
RECORD | |||
| T | ||
| Button | ||
RESET | ZOOM | ||
| |||
REW Button
Thumb Trigger |
| W |
DATE/TITLE Button |
| TITLE S.EDIT |
TITLE | ON | |
| OFF | |
| ON/OFF | |
STOP F.F Button |
| |
Button |
| |
Button |
| |
|
|
Creating a Title
1.Attach a power source and slide the CAM/OFF/VCR switch to CAM or VCR.
2.Press TITLE ON/OFF on the remote to display the title graphics.
Note: If the CAM/OFF/VCR switch is in CAM, pressing DATE/TITLE on the camcorder will also display the title page.
6.Repeat steps 4 and 5 until you have completed the title.
Note: To correct a character, press STOP to place the cursor over it and then press F.F (F.FWD on remote) or REW to enter the correct character.
If you want to delete a character, press
F.F(F.FWD on remote) or REW until the blank space appears.
3.Press STOP to move the flashing cursor to the place you want to begin.
4.Select the first character by pressing F.F (F.FWD on remote) or REW until the character you want appears. See the “Chart of Characters” on the next page for the characters available in the titler’s register.
5.After you have selected the first character, press STOP to move the flashing cursor to next position.
7.Press TITLE ON/OFF on remote to store the title and remove the title display from the viewfinder when you are finished.
Important Note: Remember to remove the title graphics from the viewfinder for normal recording.
36
