USING THE DUAL TAPE DECK (continued)
0
AUIUAV
0
Recording from an Auxiliary Source
lConnect the auxiliary sound source (a VCR, another tape deck, etc.) as described on page 7.
lPress AUX to select the auxiliary unit as the source of sound.
lInsert the cassette to be recorded on in tape deck 1, advancing past the tape’s leader if necessary.
lPress the RECORD button to begin recording from the auxiliary source. (PLAY depresses automatically)
Recording continues until the tape ends or until you press STOP/EJECT or PAUSE to interrupt the recording process.
USING THE REMOTE CONTROL
Installing Batteries
l
l
l
Slide cover off battery compartment.
Install 2 “AAA” batteries. Be sure to position the batteries in the directions indicated inside the battery compartment.
Replace the cover.
NOTE: When changing batteries, please be sure to dispose of old batteries properly, observing all state and local regulations.
The remote control allows you to control basic functions of your audio system from a distance. To use the remote control effectively, always aim the top of it directly at the SENSOR eye while pressing the function buttons.
The remote control provides remote selection of the TUNER, TAPE, CD, and AUX selector buttons, and remote operation of the compact disc player and the tuner. Operate the dual cassette deck using the controls located on the CD/Cassette unit.
Turning the System On and Off
lPress the POWER button to switch from STANDBY to POWER ON mode. The system begins operating with the sound source that was active when the system was last used.
lPress the POWER button to switch from POWER ON to STANDBY mode.
Adjusting Volume
l
l
l
Press VOLUME A to increase volume.
Press VOLUME v to decrease volume.
Press MUTE to suspend the output of sound. The red indicator light on the VOLUME dial flashes when mute is active.
lPress MUTE again to restore volume to the current setting.
