RCA RP-9753 manual Basic Connections, Connecting the Two Units, $ Connecting the Speakers

BASIC CONNECTIONS

Connecting the Two Units

Your new RCA audio system includes a Tuner/Amplifier unit and a CD/Cassette unit. These are designed so that the CD/Cassette unit rests on top of the Tuner/Amplifier unit.

I	l	Connect	the SYSTEM CONTROL	plug on	the	back	of	the	Tuner/Amplifier
		unit to	the SYSTEM CONTROL	receptacle	on	the	back	of	the	CD/Cassette
		unit. Note that the plug has one row of nine pins and one row of eight
		pins. Insert the plug so that its		pins fit into	the	corresponding				slots in the
		receptacle.

NOTE: Press the plug snugly into place to assure a complete connection.

Never connect or disconnect with power on!

CASSETTE/CD UNIT -

BACK OF SPEAKER

SPEAKER CONNECTIONS

TUNER/AMPLIFIER -

$ Connecting the Speakers I;

Your system comes equipped with two front and two surround (rear) speaker terminals. All speakers connect to terminals located on the back of Tuner/ Amplifier unit. You should connect the front speakers first.

To connect the two front speakers:

lConnect one speaker wire to the terminals on back of one front speaker. Press tabs to open, and insert end of white-striped wire in red (+) terminal and end of black wire in black (-) terminal.

lRun the speaker wire to the terminals labeled FRONT SPEAKERS on back of the Tuner/Amplifier unit and connect to the Left (L) set of terminals. In- sert end of white-striped wire in red (+) terminal and end of black wire in black (-) terminal.

lConnect the second front speaker in the same way, using the Right (R) ter- minals: white-striped wire to red (+) terminal, black wire to black (-) terminal.

0