Connecting & Setting Up

Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on

HDD & DVD RECORDER and COMPONENT IN(Y,PB,PR) jacks on your TV.

You will enjoy high quality and accurate colour reproduction images.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier).

(See pages 22~23).

3.After connecting, refer to the pages 41~43.

Other type of connecting the Audio output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

Case 1 : Connecting to your TV

Case 2 : Connecting to a stereo amplifier with AV output jacks

Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theatre System, Inc.

red

blue

green

green

blue

red

Case 1 : Connecting to your TV

If your TV has audio input jacks, use this connection.

 

Make sure that the colour coded

 

connections match. The Y, PB, PR

NOTE

component output jacks of your HDD &

 

 

DVD RECORDER must be connected to

 

the exact corresponding component input

 

jacks on your TV.

Progressive setting is only available when the Video Out is set to Component. (See pages 41~43)

22 - English

yellow

white

red

red

white

yellow

Page 22
Image 22
Samsung DVD-HR737/XEH, DVD-HR735/XEH Case 3 Component Video output jacks, Case 1 Connecting to your TV, Jacks on your TV