Samsung DVD-HR737/XEH, DVD-HR735/XEH manual To display playback related icons on

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.

1	Connect the DV output jack of your camcorder to the
	DV input jack on the front of your HDD & DVD
	RECORDER using a DV cable.
2	Press the HDD or DVD button.
	If you select DVD, press the OPEN/CLOSE button and
	place a recordable disc on the disc tray. Press the
	OPEN/CLOSE button to close the disc tray. Wait until
	LOAD disappears from the front panel display.
3	Press the REC MODE button repeatedly to select
	the recording speed(quality).
		➞ SP ➞ LP ➞ EP ➞ XP
Recording
			Record Mode SP(35:12)

4	Press the INPUT SEL. button to select DV.
	If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the screen.

DV

The DV device is connected
MOVE	RETURN

	Select the Play (√) icon on the upper part of the
5 screen to playback the camcorder and find the
	starting position to copy.
6	To start recording, use the œ √ buttons to select
	Record ( ● ) icon in the top side of the screen, then

press the OK button.

You can press the REC button of the remote control to start recording.

- To stop recording -

Press the STOP ( ) button to stop or finish a recording in progress.

•When using DVD-RW/-R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.

■ To display playback related icons on the

NOTE	screen, press any direction button on the
	remote control.

80 - English