Connections & Setup
TV/VCR back panel
ANT/CABLE | LINE IN | LINE | ||
75 | IN 1 | OUT | AUDIO | VIDEO |
VIDEO |
|
|
| Y |
L |
|
| L | PB |
|
| (CB) | ||
|
|
|
| |
AUDIO |
|
|
| PR |
R |
|
| R | |
|
| (CR) | ||
|
|
|
| |
Note: If you have model T27TF668, the placement of the jacks is different from the TV/VCR back panel illustrated here.
1A
1B
Satellite receiver back panel
|
| IN FROM ANT | CH3 |
|
|
| |
OUT |
|
| CH4 |
|
| OUT TO TV | SATELLITE |
VIDEO L | R | IN | |
|
|
|
2
From Antenna/Cable Feed
Note: The back of your satellite receiver might not look exactly like the one
3 | shown here. |
| |
From |
|
Satellite |
|
Connection: TV/VCR + Satellite Receiver
1.Connect the satellite receiver to the TV/VCR
A.Connect one end of an RF coaxial cable (not included) to the TV/VCR’s ANT/CABLE jack. Connect the other end to the satellite receiver’s antenna output jack (sometimes labeled OUT TO TV).
B.Connect the A/V cables. Connect audio cables to the TV/VCR’s LINE IN/IN 1 AUDIO (L and R) jacks and the other ends to the satellite receiver’s corresponding audio output jacks. Connect one end of the video cable to the TV/VCR’s LINE IN/ IN 1 VIDEO jack, and the other end to the satellite receiver/cable box’s video output jack.
2.Connect antenna or cable to your satellite receiver
Connect the coaxial cable from your antenna, cable feed, or cable box to the Antenna Input jack on the satellite receiver (sometimes labeled IN FROM ANT).
3.If necessary, connect the satellite’s antenna cable to the satellite receiver If the coaxial cable from the satellite dish antenna isn’t already connected to the satellite receiver’s input jack (sometimes labeled SATELLITE IN), connect it now.
Go To Page 11
10 | Chapter 1 |
