Express Recording (XPR)
Express recording lets you record up to four hours without using the timer program feature. The VCR will tirn off automatically at the end of the recording.
minutes remaining for express recording.
Operating Instructions
1.Turn on the VCR.
2.Insert a tape with safety tab in place.
3.Select the channel you want to record.
4.Select the desired recording speed using SPEED on remote.
5.Press RECORD on the VCR or REC/XPR on the remote to activate express recording.
6.Press RECORD on the VCR or REC/XPR on the remote repeatedly until the amount of recording time for the program is displayed.
Each press of RECORD on the VCR or REC/XPR on the remote increases the time from 30 minutes up to 4 hours.
X - REC and the amount of time the VCR will record appears in the VCR’s display panel.
Additional Recording Information
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO and VIDEO IN jacks of the VCR. Recording from the line input is convenient if you have a sate!.& receiver or similar component attached to these jacks. To timer record from the . component connected to the VCR’s line input:
Press INPUT on the remote to enter VIDEO IN instead of the channel number on the TV screen during timer programming.
Stopping a Recording in Progress
With the VCR: | PressPOWER, then STOP/EJECT, |
| within a few seconds. |
With the Remote: | PressVCR1 (VCR2). then STOP, |
| within a few seconds. |
24 |
|
lllll 1
