Location of Controls
Front Panel
i&mote Sensor
Remote Sensor
Receives signals from the remote control. Aim the remote at this sensor with no objects between
them.
STOP/EJECT
Stops the normal functions such as record, playback rewind,
Ejects the tape when VCR is stopped
PLAY/PAUSE
Plays a tape.
During playback, pauses action for viewing.
Pauses recording to prevent recording of unwanted scenes.
POWER
Turns the VCR on or off.
REW (Rewind)
Rewinds the tape.
Searches the picture in reverse during playback.
F.FWD. (Fast-Forward)
RECORD
Starts VCR recording.
Used for express recording (XPR).
CHANNEL Up and Down
Selects next higher or lower channel in the VCR’s channel memory.
Back Panel
Back Panel of VCR
IN FROM ANTENNA Connector
Receives a signal horn an antenna or cable system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
CH4 CH3 Switch
Selects the channel to which you will tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
VIDEO IN and AUDIO (R and L/MONO) IN Jacks
Receives signals from another component, such as a VCR or camcorder, when it is connected to these jacks.
Use the INPUT button on the remote to display L in the VCR’s display panel and VIDEO IN on the TV screen.
VIDEO OUT and AUDIO (R and L) OUT Jacks
Sends signals from VCR to another component, such as a monitor TV or another VCR, when it is connected to these jacks.
28
