Controlling a VCR
The VCR’s remote controls two compatible RCA VCRs with the VCR1 and VCR2 buttons. Most RCA VCRs automatically respond to VCR1 without being programmed. If you own two RCA VCRs, test them to see if VCR1 turns on both VCRs. If it does, then program the REMOTE CONT feature on this VCR to respond to VCR2 if you want to control VCRs separately.
Helpful Hint: Notice the difference
between the TV and VCR
displays. This is one way to tell if the remote is set to control the VCR or the TV,
Program the VCR for remote control
Set the REMOTE CONT feature of the VCR to the VCR1 or VCR2 position. The remote then controls the VCR with either the VCR1 or VCR2 button - whichever position you select in the menu.
A.Press PROGNCR+.
B.Press 5 to select SET UP VCR.
C.Press 8 to select either the VCR1 or VCR2 position.
D.Press VCR1 or VCR2 to match the selection you made in step C.
Controlling a TV
The VCR’s remote is preprogrammed to control the basic functions of a compatible RCA, ProScan, DTGE TV. The
remote can also be set up to control other manufacturer’s brands. To program the remote, use the remote button at the right that corresponds to your brand. Not all models are compatible.
Program the remote for a TV
A. Turn on the TV.
B.Point the VCR remote at the TV,
C.Hold the N button and press the remote button for your brand. If the TV changes channels, set up is complete.
D.Release both buttons.
E.Repeat steps B - D with another button if the first one does not work
Remote
Brand Button
Admiral w.9
Akai6
AOC6
Centuriean 9
Coronado 8 Cutis Mathes I,9
I).+%” 9
Emerson 68
Fisher 5
GE1
Goldstar $8
Hitachi 088
,CPenney 6,9
KMC8
68 | |
MGA | 9 |
Magnavox | 4,8,9 |
Marant | 6, (CH D”) |
|
| Remote | |
| Brand | Button | |
| Panasonic | (CH UP) | |
: | PhiIeo | 68 |
|
| Philips | 4 |
|
i | Portland | 8 |
|
| Prism | WI | UP) |
| ProScan |
|
|
| Quasar | &I | UP) |
| RCA | 1 |
|
j | Sampa | 9 |
|
| Samsung | *,9 |
|
i | Scott | 9 |
|
: | Sears | L5.7 |
|
i | Sharp | 8 |
|
| Signature ZCN 6,9 |
| |
‘, | Sony | 3 |
|
; | Syl”ania | 4,9 |
|
| T&lli~ | 4,s |
|
| Toshiba | 7 |
|
Operate the TV
After you have set up your remote to control your TV, test the TV buttons to see which ones may operate your TV
A.Point the remote at the TV and press N.
B.If TV does not bun on in step A, press N and then OFF.
Mitsubishi 6, (CH Dn)
NEC69
Yen | 9 |
Zenith | ?. |
C. Use the “TV Function Buttons” as described on page II
12
