![](/images/new-backgrounds/1232985/23298537x1.webp)
Setting Up the VCR
Startup
11. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the channels are not active, have weak signals, or you do not want to watch them.
We recommend channels be placed in memory using the Auto Channel Search feature before adding or removing channels. Channels
A. Press VCR1 (VCR2•DVD) on the remote, whichever you select in Step 10.
B. If the VCR MAIN MENU does not appear on the TV screen, press MENU•PROG on the remote.
C. Press 4 to display the CHANNELS menu.
D. Press 2 to display the ADD/REMOVE CHANNELS menu.
E. Follow the directions on the screen.
F. Add or remove more channels by entering channel numbers or using CHAN up or down.
Auto channel search using the
CHANNELS menu.
If you ever need to repeat Auto Channel Search because you change cable or antenna signals:
A. Press MENU•PROG to display the VCR MAIN MENU on the TV screen. If this menu does not appear:
¥Make sure TV is tuned to same channel as the CH3 CH4 switch on the back of the VCR or the TVÕs video input (refer to TVÕs manual).
¥Press VCR1 (VCR2•DVD), then press MENU•PROG again.
¥If you use a basic hookup, check VCR indicator in display panel Ð it should be on. Press TV•VCR to turn it on.
¥Check the connections.
B. Press 4 to display the CHANNELS menu.
C. Press 1 to begin Auto Channel Search.
The VCR automatically selects the Signal Type: CABLE (cable TV) or ANTENNA. If you need to change the setting manually, press 3.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable box Setup
6 DSS Setup
0 Exit
ADD/REMOVE CHANNELS
Channel 11
is presently ADDED
Press CLEAR to remove Press MENU to exit
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable box Setup
6 DSS Setup
0 Exit
continued on next page
17