Using the Remote Control
Buttons
VCR Function Buttons
(continued)
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
PWR (Power)
Turns off VCR when remote is set to control the VCR.
Press twice to turn off all compatible RCA components.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use the number buttons to select another. Press PREV CH to switch between the two channels.
REC
Starts VCR recording.
Used for express recording (XPR). See page 44.
REW (Rewind)
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse motion during playback.
SEARCH
Displays INDEX,
Used during playback with the COMMERCIALAADVANCEª feature. See pages
SLOW
Used for
SPEED (Tape Speed) Selects a recording speed (SP, LP, or SLP).
STOP
Stops the normal functions such as record, playback, rewind, fast forward, and pause.
TRACKING Up and Down Lets you manually reduce the streaks that may appear on the picture during play or pause.
Reduces picture ÒjitterÓ during
TV•VCR
Switches the picture signal so that it either comes from the VCR or the TV channel. See page 18.
TV Function Buttons
Press the TV button to set remote to control a compatible TV. Some buttons may not work with every TV.
MOVE Arrow
Buttons ( 
)
Allow you to move through the menus, enter data and change settings of selected features.
CHAN Up or Down Selects next higher or lower channel in the TVÕs channel memory when remote is set to control a TV.
CLEAR
Removes menus or status displays from the screen.
DISPLAY
Shows the status displays on the screen.
Removes menus or displays from the screen.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 ) Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
PWR (Power)
Turns off a compatible TV when remote is set to control TV.
Press twice to turn off all compatible RCA components.
Used with TV button to turn on a compatible TV, other than RCA, when the remote is programmed to control that TV. See page 23.
PREV CH (Previous Channel) Switches between two channels.
Select one channel and then use the number buttons to select another. Press PREV CH to switch between the two channels.
Used as an ENTER button on some TVs.
SLOW
Used with the TVÕs menus to select and adjust features.
VOL Up and Down
Raises and lowers sound.
Cable Box and Satellite Receiver Function Buttons
Press the SAT•CABLE button to set remote to control a compatible cable box or satellite receiver. Some buttons may not work with every cable box or receiver. If you have a compatible RCA brand receiver, test the ÒTV Function ButtonsÓ to see which ones operate the receiver.
CHAN Up or Down | Numbers (0 through 9) | PWR (Power) |
Selects next higher or lower | Select a channel using the number | Turns off a compatible cable box |
channel. | buttons. | or satellite receiver when remote |
|
| is set to control it. |
|
| Press twice to turn off all |
|
| compatible RCA components. |
21
