Using the Remote Control
Controlling an Auxiliary RCA Component
The remote that came packed with your VCR is also capable of controlling one compatible RCA component, such as an AM/FM radio, CD player, tape players, phonograph, RCA digital satellite receiver, or RCA DVD component. The remote must be programmed for the specific component it is to control. To program the remote, use the code that corresponds to your component.
Program the Remote for an Auxiliary Component
1. Turn on the component.
2. Point the VCRÕs remote at the component.
3. Hold the AUX button and press three number buttons to enter the code for your component.
4. Release the buttons.
5.Press PWR on the remote. If the component turns off, setup is complete.
Type of RCA Auxiliary Equipment and Code
RCA
AM/FM
003
Cassette
AUX Phono Tape1 CD
004 005 006 007
DSS 008
Cassette
Tape2 DVD
009 010
*The remote may not be able to control every RCA model of auxiliary equipment listed.
Operate the Auxiliary Component
After you have setup your remote to control your component, test the buttons to see which ones operate the component.
1. Point the remote at the component and press AUX.
2. If the component does not turn on in step 1, press AUX and then PWR.
3.Test the buttons on the remote to see which ones operate your component. Refer to the ÒRemote ControlÓ section.
25
