TROUBLESHOOTING (continued)
PROBLEM | SOLUTION |
Interference: | A) On the back of the transmitter, there is a |
| CHANNEL TUNING THUMBWHEEL. |
| Select a different frequency channel by |
| turning the thumbwheel up or down. Then |
| adjust the thumbwheel on the channel |
| tuning control on the headphones until the |
| LED Indicator glows GREEN showing that |
| the channel has been properly tuned. |
|
|
Power | A) The transmitter has an |
| When there is no audio signal (such as |
| when a CD has finished and the player |
| stops) for a period of about 90 seconds, |
| the power of the transmitter will be |
| automatically cut off. You will then hear |
| some noise from the headset and the |
| LED on the earcup will turn RED. Once an |
| audio signal is restored to the transmitter |
| (resume playing the CD or audio program), |
| then the LED on the transmitter will glow |
| RED indicating that it is transmitting audio |
| once again (the LED on the headphone |
| will turn back to GREEN to indicate |
| normal operation). |
11
