TR2350S

12. Optional blade usage

OPT7

OPT8

■STARTING THE ENGINE

Please refer 5.For safe operation (P.6), 8.Operation (P.12).

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment could rotate as soon as the engine is started. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT7)

■CUTTING METHOD

a)Use the front left side cutting.

b)Guide the blade from your right to left with it tilted slightly to your left. (OPT8)

c)When mowing a wide area, start working from your left end to avoid interference of cut grass.

d)The blade may be seized by weeds if the engine speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting depth according to the condition of object.

OPT10

•Make sure that the blade is not bent, warped, cracked, broken or damaged.

•If you find any error to the blade, discard it and change new one which is certified by RedMax.

■By using the shoulder strap, hang the unit on your right side. Adjust the strap length so that the cutting head may become parallel to the ground. (OPT10)

WARNING

Make sure to use shoulder strap and debris guard. If not, it is very dangerous when you slip or lose your balance.

WARNING

■CONTROLLING BLADE THRUST

• Blade thrust can cause serious personal injury. Carefully study this section. It is important that you understand what causes blade thrust, how you can reduce the chance of blade thrust and how you can remain in control of the unit if blade thrust does occur.

OPT9

US-18

WARNING

•If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged.

•Turn off the engine and make sure the blade has completely stop before checking the blade, and removing any object got caught in.

■OPERATION

1.Check the bolt to fasten the blade and be sure the bolt has no fault, and no abrasion.

2.Be sure that the blade and the holder have been fastened according to instruction and the blade turns smoothly without abnormal noise. (OPT9)

WARNING

•The rotating parts fastened incorrectly may cause serious accident to the operator.

1. What causes blade thrust:

•Blade thrust can occur when the moving blade contacts an object that it cannot cut. This contact causes the blade to stop for an instant and then suddenly move or ”bounce” away from the object that was hit. The operator can lose control of the unit and the blade can cause serious personal injury to the operator or any person nearby if the blade contacts any part of the body.

2.How you can reduce the chance of blade thrust:

a.Recognize that blade thrust can happen. By understanding and knowing about bounce, you can help eliminate the element of surprise.

b.Cut fibrous weeds and grass only. Do not let the blade contact materials it cannot cut such as hard, woody vines and brush or rocks, fences, metal, etc

c.Be extra prepared for blade thrust if you must cut where you cannot see the blade making contact such as in

Page 19 Page 21
Page 20
Image 20
RedMax TR2350S manual OPT7 OPT8 Starting the Engine, Cutting Method, OPT10, Controlling Blade Thrust, OPT9, Operation
Page 19 Page 21

TR2350S specifications

The RedMax TR2350S is a high-performance trimmer designed for both professional landscapers and homeowners who seek efficiency and reliability in their gardening tools. This robust machine showcases the perfect combination of power and versatility, making it an indispensable asset in any landscaping arsenal.

One of the standout features of the TR2350S is its powerful 23.6cc engine, which delivers exceptional performance while ensuring fuel efficiency. The engine is designed with advanced technologies to minimize emissions, aligning with modern environmental standards while maintaining robust power output. This ensures that users can tackle even the toughest trimming tasks without compromising on performance or contributing to pollution.

The TR2350S also features an innovative Easy Start system, which significantly reduces the effort required to start the engine. This user-friendly technology allows for a hassle-free experience, especially important for professionals who need to start up quickly and efficiently throughout their workday.

The trimmer’s ergonomic design enhances comfort during extended periods of use. It features a curved shaft that is not only lightweight but also well-balanced, reducing operator fatigue. The soft-grip handles provide additional comfort and control, allowing users to maneuver the trimmer easily around various landscaping obstacles.

Another notable aspect of the RedMax TR2350S is its dual-line cutting system, which offers a clean and efficient cut. The trimmer comes equipped with a bump feed head, ensuring that the cutting line is automatically released with a simple tap on the ground. This feature allows users to keep working without the need to stop and adjust the line manually.

Safety is also a priority in the design of the TR2350S. The unit incorporates various safety features, including a guard that helps protect the operator from debris and an easy-to-access throttle control that keeps the user in command of the trimmer’s performance.

In conclusion, the RedMax TR2350S is a versatile, powerful, and user-friendly trimmer that caters to both professionals and homeowners. Its innovative technologies, comfort-enhancing design, and safety features make it a leading choice for those looking to efficiently maintain their outdoor spaces. With the TR2350S, users can expect reliability and performance that meets the demands of any trimming job.
Top Page Image Contents