ASSEMBLY
Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires an adjustable wrench | and a rubber | |
mallet | . |
|
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 25. The second number refers to the quantity used in assembly. Note: Some small parts may have been
M4 x 16mm | M6 x 20mm Patch |
|
|
|
Screw | M6 Split | Small M8 | M10 Nylon | |
| Screw | |||
|
| Washer | Washer | Locknut |
M4 x 19mm |
|
|
|
|
Screw | M8 x 19mm Patch |
|
|
|
| Screw |
|
|
|
M4 x 25mm | M8 x 19mm Shoulder | M10 Split | Wave Washer | Large M8 |
Screw | ||||
| Screw | Washer | Washer | |
M6 x 16mm Button | M8 x 25mm Patch |
| Bolt Set |
|
|
|
| ||
Screw | Screw |
|
|
|
1.Identify the Front Stabilizer (63), which has Wheels (27) attached to one side. Attach the Front Stabilizer to the front of the Frame (1) with four M8 x 25mm Patch Screws (73).
1 | 73 |
| |
| 73 |
| 73 |
| 63 |
27 | 1 |
|
5