10. Attach the Crossbar (107) to the Handrails (82,

10

 

 

 

 

83) with four #10 x 3/4" Screws (2) and four #10

 

 

102

 

Star Washers (12). Do not tighten the Screws

 

9

 

 

yet.

212

 

 

 

Insert the Console Frame (102) into the

 

 

 

 

Handrails (82, 83). Attach the Console Frame

 

 

107

 

 

with four 1/4" x 1" Patch Bolts (9). Be careful

82

 

 

 

not to pinch the Upright Wire (87). Do not

 

 

9

 

tighten the Patch Bolts yet.

 

 

212

 

Firmly tighten the four #10 x 3/4" Screws (2)

 

 

 

87

and then the four 1/4" x 1" Patch Bolts (9).

 

 

83

 

 

 

 

 

 

11. Firmly tighten the four 5/16" x 1" Flat Head

11

 

 

 

 

Patch Bolts (3) and the two 5/16" x 1" Patch

Console

Console

 

Bolts (4) (only one side is shown).

 

 

With the help of a second person, hold the con-

 

Assembly

 

Wire

 

sole assembly near the Right Handrail (83) and

Console

 

87

 

the Left Handrail (not shown).

 

 

Connect the Upright Wire (87) to the console

Wire

 

 

 

 

wire. See the inset drawing. The connectors

 

 

 

 

 

should slide together easily and snap into

 

 

 

 

 

place. If they do not, turn one connector and try

87

 

 

 

 

again. IF THE CONNECTORS ARE NOT CON-

 

 

 

 

NECTED PROPERLY, THE CONSOLE MAY

Wire

 

 

 

 

BE DAMAGED WHEN YOU TURN ON THE

 

Ground Wire

 

POWER. Remove the wire tie from the Upright

Tie

 

 

Wire.

4

 

 

109

 

Connect the Console Ground Wire (109) to the

3

 

83

 

 

ground wire from the console assembly.

 

 

 

 

11

 

 

 

 

Page 11
Image 11
Reebok Fitness RBTL76009.0 manual Star Washers 12. Do not tighten the Screws Yet, Again. if the Connectors are not CON