3. | Identify the Right Upright (85) and the Right | 3 |
|
|
|
| Upright Spacer (91), which are marked with |
|
|
| |
| “Right” stickers. | 87 |
|
| 85 |
| Insert the Upright Wire (87) through the Right | Wire Tie |
| ||
| Upright Spacer (91) as shown. Set the Right |
|
| 87 | |
| Upright Spacer on the Base (95). See inset |
|
|
| |
| drawings B and C. Make sure that the Right |
|
|
| 91 |
| Upright Spacer sits flush against the Base. If |
|
|
| 95 |
| necessary, turn the Right Upright Spacer and |
|
|
| |
| try again. | A |
|
|
|
| Have a second person hold the Right Upright |
|
|
| |
| (85) near the Base (95). See inset drawing A. |
|
|
|
|
| Tie the wire tie in the Right Upright securely |
| 85 |
|
|
| around the end of the Upright Wire (87). Then, |
|
|
| |
| pull the other end of the wire tie until the Upright |
| Wire |
|
|
| Wire is routed completely through the Right | 87 |
|
| |
| Upright. | Tie |
|
| |
|
| B | Correct | C | Incorrect |
|
| 91 | 95 | 91 | 95 |
4. Hold a Bolt Spacer (14) inside the lower end of | 4 |
|
|
| |
| the Right Upright (85). Insert a 3/8" x 4" Patch |
|
| 7 | |
| Bolt (7) with a 3/8" Star Washer (11) into the |
|
|
| |
| Right Upright and the Bolt Spacer. Repeat this |
| 85 |
|
|
| step with a second Bolt Spacer (14), 3/8" x 4" |
|
| 11 | |
| Patch Bolt (7), and 3/8" Star Washer (11). |
|
|
| |
| Hold the Right Upright (85) against the Right |
|
|
| 8 |
| Upright Spacer (91). Be careful not to pinch |
|
|
| 14 |
| the Upright Wire (87). Tighten the 3/8" x 4" |
|
|
| |
| Patch Bolts (7) until the heads of the Patch Bolts |
|
|
|
|
| touch the Upright; do not fully tighten the |
|
|
| 91 |
| Patch Bolts yet. |
|
|
| |
|
| 8 |
|
|
|
