Regency E33S installation manual Safety Label, Installation

Models: E33S

1 32
Download 32 pages 6.75 Kb
Page 4
Image 4
INSTALLATION

INSTALLATION

SAFETY LABEL

This is a copy of the safety label that accompanies the E33 SunriseTM Gas Insert. We have printed a copy of the contents here for your review. The safety label is located on a plate inside the base of the unit visible when the bottom louver is opened.

NOTE: FPI units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.

For the State of Massachusetts, installation and repair must be done by a plumber or gasfitter licensed in the Commonwealth of Massachusetts.

For the State of Massachusetts, flexible connectors shall not exceed 36 inches in length.

For the State of Massachusetts, the appli- ances individual manual shut-off must be a t-handle type valve.

The State of Massachusetts requires the installation of a carbon monoxide alarm in accordance with NFPA 720 and a CO alarm with battery back up in the same room where the gas appliance is installed.

4

Regency® E33S-1 Sunrise Gas Insert

Page 4
Image 4
Regency E33S installation manual Safety Label, Installation