INSTALLATION

INSTALLATION

11)Due to high temperatures, the appliance should be located out of high traffic areas and away from furniture and draperies. Children and adults should be alerted to the hazards of high surface temperatures, especially the fireplace glass, and should stay away to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the same room as the appliance. Clothing or other flammable material should not be placed on or near the appliance.

Emissions from burning wood or gas could contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

a. Glass Crystals

b. Contemporary Faceplate c. Remote Control

d. Wall Thermostat

9)Final check. Refer to the "Final Check" section. Before leaving this unit with the customer, the installer must ensure that the appliance is firing correctly. This includes:

a)Clocking the appliance to ensure the correct firing rate.

b)Adjusting the primary air, if required, to ensure that the flame does not carbon. Refer to the "Gas Insert Aeration System" section.

c)Ensuring that the appliance is venting correctly.

MINIMUM FIREPLACE

OPENING

The minimum fireplace opening is shown in the following diagrams:

Width (at front)

32-1/4" (819mm)

 

 

Width (at rear)

25" (635m)

 

 

Depth

16-3/4" (425mm)

 

 

Height

24-3/16" (614mm)

 

 

INSTALLATION

CHECKLIST

Before installing vent system ensure that the damper plate is open and secure to prevent the damper plate from falling down and crushing the liner.

The FPI Gas Insert is installed as listed below.

1)Check all clearances to combustibles. Refer to the following sections where applicable:

a.Minimum Clearances to Combustibles

b.Combustible Mantel Clearances

2)Make the gas connection. Refer to the "Gas Connection" section.

3)Install the 3" flue liner to the sliding connector plate. Refer to the "Flue Liner Installation" section.

4)Slide the unit half way into the fireplace.

5)Pull the vent connector plate through the tapered brackets and fasten to the front plate. Refer to the "Flue Liner Installation" section.

6)Slide the unit fully into the fireplace.

7)Test gas pressure, refer to the "Gas Pipe Pressure Testing" section. Check aeration system, refer to "Gas Insert Aeration Systems" section.

8)Install standard and optional features. Refer to the following sections where applicable:

MATERIALS

REQUIRED

No electrical power supply is required for the gas control to operate. A 120 Volt AC power cord is hooked up to the fan. Plug the 3 wire cord into a suitable receptacle. Do not cut the ground terminal off under any circumstances. When connected with 120 volts, the appliance must be electrically grounded in accordance with local codes, current version of the Canadian Electrical Code CSA C22.1 (in Canada) or in the absence of local codes, with the National Electrical Code ANSI/NFPA 70.

WARNING:

Electrical Grounding Instructions This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

8

Regency® E33S-1 Sunrise Gas Insert

Page 7 Page 9
Page 8
Image 8
Regency E33S installation manual Minimum Fireplace Opening, Installation Checklist, Materials Required
Page 7 Page 9

E33S specifications

The Regency E33S is a remarkable venture into the realm of compact, feature-rich functional appliances, specifically engineered to cater to a variety of user needs. Designed with elegance and functionality in mind, the E33S stands out due to its modern aesthetic and advanced technology.

One of the main features of the Regency E33S is its powerful energy-efficient system, which ensures optimal performance while minimizing electricity consumption. This appliance is equipped with a high-efficiency compressor that not only reduces energy costs but also maintains a consistent temperature, contributing to the longevity of the items stored within.

In terms of capacity, the E33S boasts ample storage space, making it an excellent choice for both residential and commercial users. With intelligently designed shelving arrangements, it allows for the maximum utilization of space, accommodating various sizes and types of items. The adjustable shelves provide flexibility, which is essential for diverse storage needs.

The E33S is also integrated with innovative smart technology. Featuring Wi-Fi connectivity, users can monitor and control the appliance remotely, ensuring optimal performance and peace of mind. The accompanying mobile application allows for temperature adjustments, alerts for any fluctuations, and energy usage tracking, making it a highly user-friendly solution.

In addition, the Regency E33S prioritizes hygiene and freshness. It is equipped with advanced filtration systems that minimize odors and effectively filter out contaminants. This feature is particularly beneficial for preserving food quality and extending shelf life.

Another notable aspect of the E33S is its sleek design, which fits seamlessly into any decor. The appliance is available in various finishes, allowing users to choose one that complements their space beautifully. The exterior is not only stylish but also durable, ensuring longevity.

Lastly, built with eco-friendly materials, the Regency E33S reflects a commitment to sustainability. Its construction takes into account environmental impact, making it an ideal choice for eco-conscious consumers.

In conclusion, the Regency E33S combines efficiency, innovative technology, and elegant design to meet the diverse needs of modern users, setting a new standard in the compact appliance market.
Top Page Image Contents