INSTALLATION
CONTEMPORARY FACEPLATE &
DOOR FRAME INSTALLATION
INSTALLATION
Kit# 341-914 Contents List:
1 | Complete Faceplate with Switches |
1 | Door Frame |
1Bottom Louver
2Hinges
4 | Hinge Screws |
4 | Hinge Spacers |
8 | Pan Head Screws |
1 | Wire Clip |
1Instruction Sheet
1)Bring the faceplate up in front of the unit and connect the red & black ON/OFF wires from the unit to the ON/OFF switch on the back of the left side of the faceplate.
3)Secure loose wires using wire clips along the back of the left side of the faceplate. Ensure to run the wires away from the fi rebox as much as possible.
4)Align the faceplate tabs with the tab brackets on the inside top of the fi rebox and slide in place.
NOTE: For easy installation do not force both tabs in at the same time, stagger from left to right.
Tab Brackets
2) Connect the grey coated female ends of the black & red fan wires | Faceplate |
from the unit to the male ends of the fan rheostat on the left side of | |
the faceplate as shown. | Tabs |
Fan Rheostat
18 | Regency® |
