INSTALLATION
BEFORE YOU START | ASSEMBLY STEPS |
Check your inventory list to be sure you have all the necessary parts supplied in good usable condition. Check for any concealed damage. Check the operation of the combustion air damper. When the damper is in the fully closed position, the damper handle should be to the right. When damper is in the fully open position, the damper handle must be in the left position.
Installation Components
Note: The following steps represent the nor- mal sequence of installation. Each installation is unique, however, and might require different steps. Each step is dealt with in detail in the fol- lowing pages.
1)Install
2)CompleteFramingfortheWarmHearth(refer to the Framing section).
IMPORTANT: Remove all gold accesso- ries such as door, louvers while installing to avoid marking.
Position fi rebox prior to framing or into pre- pared framing (refer to the Framing Details section).
3)Install the chimney system (refer to the Chimney System Considerations section).
4)Install outside combustion air kit (refer to Installing the Outside Air Kit section).
5)
6)Install the Blowers (refer to the Installing the Blower Systems).
7)Gravity Air Feed Option (refer to the Gravity Air Feed Kit Option).
8)Install Central Heat Kit, if applicable (refer to the Installing Your Central Heating System section).
9)Complete fi nish wall material, surround and hearth extension to your individual taste ( refer to the Finishing the WarmHearth).
10)Position masonry liner/bricks and ceramic fi ber insulation in the unit. Attach gold lou- vers, glass, door, spring handles (refer to the Masonry Liner / Bricks section).
INSTALLING THE
Attach these
10 | Regency Z2510 WarmHearth |
