Remington Power Tools 494 operating instructions Operation

Operation

1.Grasp muzzle and slide barrel forward rapidly until it stops. This sets piston into firing position and opens the chamber.

482-70 482-71

2.Insert power fastener into muzzle of tool, head end first. Push the fastener until point is even with end of tool. ALWAYS load the fastener first, then the power load.

		NOTE:
		Failure to start with
		the lowest power
		level can result in
		overdrive condition
482-71	482-72	and will result in
		damage to tool

(see page 13).

3.Select the proper Remington Power Load and insert into the chamber until it stops (see Application Chart on page 23).

4.Push barrel into housing to the closed position.

101437

14