Troubleshooting Guide (cont.)
PROBLEM | POSSIBLE CAUSE | REMEDY |
|
|
|
Tool does not completely | Misassembled or damaged | Remove breech and check all |
depress. | breech and firing pin parts. | parts for correct fit assembly. |
|
|
|
Tool does not fire. | Failure of tool to depress | See data listed under Tool |
| completely. | Does Not Completely Depress, |
|
| above. |
|
|
|
| Dirt buildup on breech not | Check firing pin indentation on |
| allowing proper penetration of | cartridge. Clean breech, breech |
| firing pin. | face, and firing pin. |
|
|
|
Opening and closing of barrel | Lack of proper cleaning. | Inspect and clean complete tool |
or pushing down of the tool, |
| (see Maintenance on page 16). |
etc. is not smooth but is rough |
| Replace worn or damaged |
or binds. |
| parts. |
|
|
|
Parts Centrals
Contact authorized dealers of this product. If they can’t supply original replacement part(s), either contact your nearest Parts Central (see below) or call DESA International’s Parts Department at
When calling DESA International, have ready
• model number of your tool | • replacement part number |
RAILWAY DISTRIBUTORS 264 Railway Avenue Campbell, CA 95008
Guy Bothelho
BALTIMORE ELECTRIC
PORTABLE HEATER PARTS 342 No. County Road 400 East Valparaiso, IN 46383
F B D
21st CENTURY
RD 2, Box 165 Perkasie, PA 18944
1348 Dixwell Avenue | 601 Hope Street |
Hamden, CT 06574 | Bowling Green, KY 42101 |
Parts Department |
|
| MASTER SERVICE CENTER |
ALL TOOL & FASTENER | 1184 Wilson NW |
7830 N.W. 72nd Avenue | Grand Rapids, MI 49504 |
Miami, FL 33166 | US |
Parts Department | Mike Fowler |
PRECISION TOOL | MANZO ASSOCIATES |
431 Commerce Park Drive | 1645 Bustleton Pike |
Suite 106 | Feasterville, PA 19053 |
Marietta, GA 30060 | |
Parts Department | |
Bob Young |
|
BLUEBONNET TOOL 10490 Shady Trail Suite 104
Dallas, TX 75220
CLARK SUPPLY 9435 Summerbell Houston, TX 77074
101437
17
