ASSEMBLY

IMPORTANT: Read and understand this manual before assembling or operating this chain saw. Improper use of saw can cause severe injury. Keep this manual for future reference.

Note: Some models are pre-assembled. Assembly is not needed on these models.

See Saw Chain Tension Adjustment.

WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.

IMPORTANT: Do not clamp chain saw in vise during assembly.

The plastic hardware bag should include:

two guide bar bolts

two guide bar nuts

one Phillips-head tapping screw

1.Lay chain out flat.

2.Install front hand guard onto saw body. Do this by pressing two mounting stand-outs on hand guard into hex-shaped holes in saw body (see Figure 2).

3Insert tapping screw through hand guard and into saw handle. Tighten screw firmly.

4.Turn adjusting screw counterclockwise (see Figure 3). Continue to turn adjusting screw until adjusting block is to rear of adjusting plate.

5.Install guide bar onto saw body. Place rear of guide bar between adjusting plate and sprocket support.

IMPORTANT: Make sure to insert adjusting block into oval adjusting hole on guide bar.

6.Line up holes on sprocket support with center slot on guide bar and holes in saw body.

7.Insert guide bar bolts through front hand guard, saw body, center slot of guide bar, and sprocket support. Attach guide bar nuts to guide bar bolts.

IMPORTANT: Tighten guide bar nuts finger tight only. Make sure adjusting block is in oval adjusting hole on guide bar.

8.Place chain around drive sprocket, then along top groove of guide bar and around guide bar nose. Note: Make sure cutting edges of chain are facing the right direction. Position chain so cutting edges on top of guide bar face guide bar nose (see Figure 3).

9.Adjust saw chain tension. Follow steps under Saw Chain Tension Adjustment.

CAUTION: Do not place chain on saw backwards. If chain is backwards, saw will vibrate badly and will not cut.

Tapping

 

 

Screw

Front Hand Guard

 

 

 

 

Towards Guide

 

Bar Nose

 

Guide

Saw

Cutting

Chain

Edge

Bar

Drive

 

Bolts

 

Sprocket

 

 

 

Mounting

 

 

Stand-Outs

 

 

 

 

Guide

 

 

Bar

 

 

Adjusting

 

 

Hole

 

Guide Bar Nuts

Figure 2 - Assembling Guide Bar, Chain,

 

and Hand Guard

 

Adjusting

 

 

Block

Adjusting Plate

Adjusting Screw

Sprocket Support

Figure 3 - Part Locations For Assembling Guide Bar

www.remingtonpowertools.com

8

Page 8
Image 8
Remington Power Tools ES1512US, ES1514US, ES1514AS Assembly, Important Do not clamp chain saw in vise during assembly

ES1514US, ES1514AS, ES1512US, 100089-06A specifications

Remington Power Tools stands as a prominent name in the arena of outdoor equipment, particularly known for their lawn and garden tools that combine efficiency, power, and ease of use. Four standout models in their lineup are the 100089-06A, ES1512US, ES1514AS, and ES1514US. Each of these tools showcases unique features catering to diverse user needs while maintaining Remington's reputation for quality.

The Remington 100089-06A is particularly appreciated for its remarkable versatility. This model comes equipped with a powerful 33cc two-cycle engine, making it an excellent choice for tackling tough yard tasks. The user-friendly design ensures easy start-up, and the ergonomic handle reduces user fatigue, allowing for prolonged operation without discomfort. Additionally, its attachment capability allows users to customize the tool based on their specific gardening needs.

Moving on to the ES1512US, this electric chainsaw is engineered for precision cutting. It features a robust 12-amp motor that provides sufficient power for various cutting tasks. The tool's lightweight design makes it accessible for both seasoned professionals and novice users. Its low kickback 12-inch bar and chain ensure safety while delivering smooth and efficient cuts. Plus, the tool is equipped with a tool-less chain tensioning system, allowing for easy adjustments on the fly.

The ES1514AS is another electric chainsaw, but with enhanced specifications. It steps up with a 14-inch bar, making it ideal for larger branches and logs. This model also carries a 15-amp motor, which enhances its cutting power substantially. One of its key technologies is the automatic oiler, which ensures that the chain remains lubricated, reducing friction and extending the life of the tool. It’s designed to operate quietly, making it a great choice for residential areas.

Lastly, the ES1514US shares many features with the ES1514AS but is distinguished by its extended user-friendly characteristics, ensuring maximum efficiency and comfort. With an ergonomic handle and a lightweight design, it provides the convenience needed for extended periods of work without fatigue. Both ES1514 models boast a safety brake feature that immediately halts the chain movement upon encountering resistance, further ensuring user safety.

In conclusion, Remington's 100089-06A, ES1512US, ES1514AS, and ES1514US showcase a blend of power, safety, and user-friendly innovations. Each tool is tailored to meet different gardening and lawn care needs, making them invaluable assets for both casual gardeners and dedicated landscapers alike.