iMPORTANT SAFETY INFORMATION
• For chain saw, use firm grip. Thumbs and fingers must wrap around saw handles.
• For pole saw, have one hand gripping the handle and the other gripping the pole. Use firm grip. Thumbs and fingers must wrap around pole and handle.
• Use both hands to grip saw while saw is running. Use firm grip. Thumbs and fingers must wrap around saw handles.
• Keep all safety items in place on saw. Make sure they work properly.
• Chain saw - do not overreach or cut above shoulder height.
• Pole saw - do not overreach or extend arms above shoulder height.
• Keep solid footing and balance at all times.
• Stand slightly to left side of saw. This keeps your body from being in direct line with chain.
• Do not let guide bar nose touch anything when chain is moving (see Figure 1).
• Never try cutting through two branches at same time. Only cut one log at a time.
• Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).
• Watch for shifting of wood or other forces that may pinch chain.
• Use extreme caution when reentering a previous cut.
• Use
• Never use dull or loose chain. Keep chain sharp with proper tension.
Saw Maintenance and Kickback Safety
Follow maintenance instructions in this manual. Proper cleaning of saw and chain and guide bar maintenance can reduce chances of kickback. Inspect and maintain saw after each use. This will increase the service life of your saw.
Note: Even with proper sharpening, risk of kick- back can increase with each sharpening.
Direction
Maintenance and Storage of Saw
1.Unplug saw from power source:
•when not in use
•before moving from one place to an other
•before servicing
•before changing accessories or attachments, such as saw chain and guard
2.Inspect saw before and after each use. Check saw closely if guard or other part has been dam- aged. Check for any damage that may affect operator safety or operation of saw. Check for alignment or binding of moving parts. Check for broken or damaged parts. Do not use saw if damage affects safety or operation. Have damage repaired by authorized service center.
3.Maintain saw with care:
•Never expose saw to rain.
•Keep chain sharp, clean, and lubricated for better and safer performance.
•Follow steps outlined in this manual to sharpen chain.
•Keep handles dry, clean, and free of oil and grease.
•Keep all screws and nuts tight.
•Inspect power cord often. If damaged, have repaired by authorized service cen ter.
•Never carry saw by power cord.
•Never yank power cord to unplug it.
•Keep power cord from heat, oil, and sharp edges.
•Inspect extension cords often and re place if damaged.
4.When servicing, use only identical replace- ment parts.
5.When not in use, always store saw:
•in a high or locked place, out of children’s reach
•in a dry place
•in a carrying case or with scabbard over guide bar
•drain oil after each use and before storing saw to prevent oil leakage.
Save these instructions. It is your guide to safe
and proper operation of this saw.
90°
Do Not Let
Guide Bar
Touch Here
Figure 1 - Kickback Hazard Example: Do Not Let Nose of Guide Bar Touch Object While Chain is Moving
www.desatech.com |
