Remington Power Tools ST3812B, ST4514B owner manual Removing spool cover and spool

REMINGTON® ELECTRIC TRIMMER/EDGER 9

4. Remove the line retaining ring from the spool (see Figure 4-16).

5. Measure out 30 feet of replacement line.

6. Push one end of the new line through the left line mounting hole on the spool (see Figure 4-17).

7. Feed 15 feet of the line through this hole. Feed the other 15 feet of line through the right line mounting hole (see Figure 4-18). Pull the line tight (see Figure 4-19).

Line Retaining

Ring

Figure 4-14: Removing spool cover and spool

Figure 4-16: Removing line retaining ring

Direction of

Line Feed

Figure 4-15: Cleaning spool

Figure 4-17: Inserting line in left hole

Figure 4-18: Inserting line in right hole

Direction of

Line Feed

Figure 4-19: Pulling line tight

Direction of Line Feed

118035