Section 4 Executing RPCGEN
Rev. 1.01 Mar. 17, 2008 Page 18 of 128
REJ10J1822-0101
Figure 4.8 [New Build Phase - Step 4 of 4] Dialog Box
Although no environment variables need to be added for RPCGEN, you can add environment
variables for the Perl environment as required.
Creation of the RPCGEN custom build phase is now complete.
Next, the syntax for messages about RPCGEN must be defined. After the syntax has been defined,
the corresponding config file (*.x) will be opened in response to double-clicking on an RPCGEN
error message output in the [Build] window of the High-performance Embedded Workshop.
In the [Build Phases] dialog box shown in figure 4.4, select “rpcgen” and click on the [Modify]
button. The [Modify rpcgen] dialog box opens. Select the [Output Syntax] tab and type in the
syntax for errors shown in figure 4.9.
Figure 4.9 [Add Output Syntax] Dialog Box