•Do not operate the HUMIDAIRE 3i if the CPAP device has a damaged power cord or plug.
•Do not operate the HUMIDAIRE 3i if it is not working properly or if any part of it has been dropped or damaged.
•Keep the CPAP device power cord away from heated surfaces.
•Do not drop or insert any object into any opening or tubes.
•Do not use the HUMIDAIRE 3i in the presence of flammable or explosive materials.
•Explosion
•If oxygen is used with this device, the oxygen flow must be turned off when the device is not operating.
If oxygen has been left on, turn off the flow generator, then wait 30 minutes before turning on the flow generator again.
Explanation: When the CPAP device is not in operation and the oxygen flow is left on, oxygen delivered into the air delivery tubing may accumulate within the CPAP machine enclosure and create a risk of fire. This applies to most types of CPAP machines.
•Oxygen supports combustion. Oxygen should not be used while you are smoking or in the presence of an open flame.
•Always ensure airflow is being generated by the device before the oxygen supply is turned on.
•Always turn the oxygen supply off before stopping the airflow from the device.
Note: At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration will vary, depending on where the oxygen is introduced, the pressure settings, patient breathing pattern, mask selection and leak rate.
ENGLISH |
COMPONENTS OF YOUR HUMIDAIRE 3i
Please refer to the illustrations in section A of the illustration sheet.
SETTING UP YOUR HUMIDAIRE 3i FOR USE
WARNING
! Make sure your flow generator is switched off at the power outlet before connecting the HumidAire 3i.
REMOVING THE FRONT CAP (IF FITTED)
Please refer to the illustrations in section B of the illustration sheet.
Your flow generator may be fitted with a front cap
COMPONENTS OF YOUR HUMIDAIRE 3i | 5 |
