ResMed s8 manual Technical Specifications, Symbols which appear on the device, English

Technical Specifications

Operating pressure range	4 to 20 cm H2O
Dimensions (H x W x D)	4.6" x 6.5" x 5.7" (112 mm x 164 mm x 145 mm)
Weight	3.1 lb (1.4 kg)
Operating Temperature	+41°F to +95°F (+5°C to +36°C)
Power Supply	• Input range for S8 Series II with HumidAire 3i: 100–240V, 50/60Hz;
	110V, 400Hz; 2.5A <140VA (110W) (maximum power consumption).
	Instantaneous peak power consumption <340VA.
	• Refer to the DC-12 converter instructions for DC ratings. Only use
	the ResMed DC-12 converter for DC input.
	• Typical power consumption at 20 cm H2O is 39VA or 20.7W.
Operating Humidity	10%–95% non-condensing
Storage and Transport	-5°F to -140°F (-20°C to +60°C)
Temperature
Storage and Transport	10%–95% non-condensing
Humidity
Operating Altitude	Sea level to 8500’ (2591 m)
Electromagnetic	Product complies with all applicable electromagnetic compatibility
Compatibility	requirements (EMC) according to IEC60601-1-2, for residential,
	commercial and light industry environments. The electromagnetic
	compatibility tables for these ResMed devices can be found on
	www.resmed.com, on the Products page under Service and
	Support. Click on the PDF file for your device.
Air Filter	Two-layered, powder-bonded, polyester non-woven fibre
Air Tubing	Flexible plastic, 6’ 6" (2 m)
Air Outlet	The 22 mm conical air outlet complies with EN 1281-1
IEC 60601-1 Classifications	Class II (double insulation), Type CF
Supplemental Oxygen	Recommended maximum supplemental oxygen flow: 4 L/min
Housing Construction	Flame retardant engineering thermoplastic
Noise Level	Radiated sound pressure is measured at <24±2 dBA at 10 cm H2O and
	3’3.36” (1 m) according to ISO17510-1

The manufacturer reserves the right to change these specifications without notice.

Symbols which appear on the device

Attention, consult accompanying documents; Drip proof; Type CF equipment;

Dangerous voltage; Class II equipment; Start/Stop.

English

Troubleshooting 15