Stopping Treatment
To stop treatment at any time, remove your mask and press .
If your clinician has enabled SmartStart, simply remove your mask and treatment will end.
Changing the Settings on your S8 II Device
You can change settings (such as Ramp Time, EPR Level) on the S8 II by using the keypad and LCD. When the device is in standby mode you can display a series of screens (a menu) on the LCD screen in order to view and change the settings for a particular function.
The Standard Menu
Your clinician will have enabled the menu on your S8 Series II device. The picture shows the standard menu in each mode.
CPAPAUTOSET
WELCOME | WELCOME |
S8 CLASSIC | S8 CLASSIC |
>>>>>> | >>>>>> |
S8RAMP:CLASSIC10min | S8SETTLING:CLASSIC 10min |
menu | menu |
EPR LEVEL: 1 | exit * | EPR LEVEL: 1 | exit * | ||||
change |
|
| change |
|
| ||
|
|
English
USED HRS: 08000 | |
| exit |
USAGE: 1000/1068 | |
| exit |
MASK: ULTRA |
|
change | exit |
SW: SX4800100 |
exit |
USED HRS: 08000 | |
| exit |
USAGE: 1000/1068 | |
| exit |
MASK: ULTRA |
|
change | exit |
SW: SX4800100 | |
| exit |
* Only displayed if access set by clinician.
Note: The AutoSet menu is available on the S8 AutoSet II only.
To enter the standard menu from the standby (RAMP or SETTLING) screen, press
.
Changing the Settings on your S8 II Device | 5 |