Manuals / RF-Link Technology / Baby / Model Vehicle

RF-Link Technology Network Communications Module, RFL NCM manual Remote Control Using NMS

Models: Network Communications Module RFL NCM

1 52
Download 52 pages 11.34 Kb
Page 33
Image 33

REMOTE CONTROL USING NMS

There are two ways to program the NCM module, locally using DIP switches, or Remotely using NMS (Network Management Software). If your NCM module is to be used in NMS application mode, it is highly recommended to set-up the NCM module using the DIP switches only, since the NCM card in the NMS application mode is the vehicle for NMS communication.

Refer to the IMUX 2000 or IMUX 2000E Instruction Manuals for information on using NMS. Go to the NCM module using NMS. Go to the NCM General Configurations and Status window for node 1.

The NCM General Configurations and Status window for node 1 of a T1 system is shown in Figure 12. The General Configurations window is on the left and the Status window is on the right. The General Configurations window, on the left, is where the user can change the NCM configuration parameters. This window has three top-level pages selectable by the tabs at the top of the window as follows: General, Address and Serial Port. The following discussion covers the settings on the “General” page.

Note that there is one check box and six parameters that must be set. The box can be checked or unchecked and each of the six parameters must be set. The selections for each parameter can be viewed by using the up and down arrows. Then click on the desired parameter to make your selection.

Figure 12. NCM General Configurations and Status window for Node 1

 

RFL NCM

 

RFL Electronics Inc.

November 6, 2007

33

(973) 334-3100

Page 32 Page 34
Page 33
Image 33
RF-Link Technology Network Communications Module, RFL NCM manual Remote Control Using NMS
Page 32 Page 34

Network Communications Module, RFL NCM specifications

RF-Link Technology has emerged as a significant player in the realm of wireless communication, and one of its standout offerings is the RFL NCM (Network Communications Module). This module is designed to facilitate efficient and reliable data transmission in a variety of applications, making it a versatile solution for both industrial and commercial needs.

The RFL NCM is built on advanced RF technologies that support multiple communication protocols, ensuring compatibility with different systems and devices. One of its main features is its exceptional range. The module is capable of transmitting data over long distances, making it ideal for applications where devices are spread out. This long-range capability is essential for remote monitoring and control tasks, such as in smart agriculture, environmental monitoring, and industrial automation.

Another defining characteristic of the RFL NCM is its low power consumption. The module employs energy-efficient communication methods, enabling devices to operate for extended periods without frequent battery replacements. This makes it particularly useful in applications where power availability is limited or where continuous operation is required without maintenance interruptions.

The RFL NCM supports a variety of communication protocols, including LoRa, Zigbee, and MQTT, providing flexibility for developers and integrators to choose the most suitable technology for their specific applications. Its robust design ensures resilience in various operating conditions, including extreme temperatures and potential environmental hazards like moisture and dust.

Ease of integration is another strong point of the RFL NCM. With extensive documentation and support, developers can quickly incorporate the module into their existing systems. It also features built-in security protocols to safeguard data during transmission, which is particularly important in today’s increasingly connected world where data breaches are a growing concern.

The RFL NCM is not just about performance; it inherently supports scalability, allowing users to expand their network as their needs grow, whether that's adding more sensors to a monitoring system or integrating additional devices in a smart home. This commitment to both performance and adaptability makes the RFL NCM an attractive option for developers looking to harness the power of RF communications.

In summary, the RF-Link Technology RFL NCM stands out due to its long-range capabilities, low power consumption, support for multiple communication protocols, and robust integration features. With applications across various sectors, including industrial, commercial, and residential, this module promises to enhance connectivity and streamline operations in an increasingly wireless world.