Rhino Mounts SE4 manual Driving the Tractor and Implement

OPERATION

Inspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on that carrier IMMEDIATELY if either blade has:

•Become bent or deformed from it’s original shape or

•Any cracks are visible, or

•Deep gouges in the blades surface are persent, or

•Gouges or chipped areas in the cutting edge are larger than 1/2”, or

•The material on the leading edge has been worn away by more than 1/2”

Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and ejection of the broken part with tremendous force which may cause serious bodily injury or

death. OPS-U-0032

9. DRIVING THE TRACTOR AND IMPLEMENT

Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and precautions to take while driving with an attached implement. Ensure the tractor has the capacity to handle the weight of the implement and the tractor operating controls are set for safe transport. To ensure safety while driving the tractor with an attached implement, review the following. OPS-U- 0012

Never run the Tractor engine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your health. (SG-23)

SE4 05/05 Operation Section 4-19

© 2005 Alamo Group Inc.

OPERATION