Rhino Mounts SE4 manual Mower Pre-Operation Inspection/Service

OPERATION

OPERATION

8.2 Mower Pre-Operation Inspection/Service

Before each mower use, a complete inspection and service is required to ensure the mower is in a good and safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the mower is ready for operation, conduct the following. OPS-R-0007

The operator’s manual and decals affixed on the unit contain important instructions on the safe and proper use of the equipment. Maintain these important safety features on the implement in good condition to ensure the information is available to the operator at all times.

•Ensure the manual canister is secured to the equipment with the operator’s manual inside.

•Ensure all decals are in place and legible. Replace missing, damaged, and unlegible decals. OPS-U- 0011

•Perform scheduled lubrication as detailed in the maintenance section.

•Inspect that the 3-point hitch pins are the proper size, correctly installed, and secured to the tractor lift arms with retaining pins inserted.

•Ensure that a properly rated safety tow chain is equipped securing the mower to the tractor.

•Check that the driveline is securely attached to the tractor and the clamping cone is seated in the groove of the PTO shaft. OPS-R-0008_C

•Ensure deflectors and/or chainguards are in position and not damaged. Replace worn, broken, and missing pieces. OPS-R-0038

SE4 05/05 Operation Section 4-16

© 2005 Alamo Group Inc.