Rhino Mounts TW144 manual Hydraulic or Manual Lift, Wheels Pull Type

ASSEMBLY

HYDRAULIC OR MANUAL LIFT

Attach the Spring Assembly option (FIGURE Asm-R-0186)to the lug on the cutter deck behind the Center Gearbox. Retain using 3/4 x 3 capscrew and locknut. Install the Hydraulic Cylinder (FIGURE Asm-R-0187)or the manual Ratchet Lift Screw 1"x2 3/4(FIGURE Asm-R-0187)between the Axle Center Lug and the Lug directly behind the Center Gearbox. Tighten all Bolts securely.

WHEELS - PULL TYPE

Install the Wheels on the Wheel Hubs.

Note: If Laminated Tires are used, place the flat side of the Lug Nut against the Wheel FIGURE Asm-R-0127.

Note direction of travel and curvature of rubber segments in tire and install as shown in FIGURE Asm-R-0127.

TW144 01/11 Assembly Section 3-7

© 2011 Alamo Group Inc.

ASSEMBLY