SAFETY

CRUSHING HAZARDS

TO AVOID SERIOUS INJURY OR DEATH FROM FALLING OFF TRACTOR, EQUIPMENT RUN OVER, ROLLOVER AND CRUSHING BY FALLING WING OR IMPLEMENT:

USE ROPS and SEAT BELT equipped tractors for mowing operations.

KEEP ROPS lock in up position.

ALWAYS BUCKLE UP seat belt when operating tractor and equipment.

ONLY OPERATE tractor and equipment while seated in tractor seat.

WHEN RAISING OR LOWERING IMPLEMENT:

Raise or lower ONLY WHILE SEATED in tractor seat with seat belt buckled.

Raise or lower ONLY when implement tongue is securely attached to tractor drawbar TO AVOID implement tip over.

KEEP BYSTANDERS CLEAR of area TO AVOID crushing.

LIFTED Equipment can fall from mechanical or hydraulic failure or inadvertent Control Lever movement.

TO AVOID EQUIPMENT FALLING while working near or under lifted wings, components and implements raised by 3-Pointed tractor hitch:

SECURELY SUPPORT or block up raised equipment and components.

BLOCK UP and securely support equipment before putting hands, feet or body under raised equipment or lifted compo- nents.

WHEN PARKING Implement and Tractor:

LOWER implement, LOCK or BLOCK lifted parts before leaving equipment.

NEVER leave implement unattended in a raised position.

TO AVOID CHILDREN FALLING OFF OR BEING CRUSHED BY EQUIPMENT:

NEVER ALLOW children to play on or around Tractor or Implement.

WHEN UNHITCHING IMPLEMENT:

LOWER implement, LOCK or BLOCK lifted parts before leaving equipment.

USE tongue jack to control implement tongue movement.

USE tongue JACK to lift heavy implement tongues.

AVOID overloading jack to prevent jack failure and injury. PN CH02

SAFETY

TW144 01/11

Safety Section 1-5

© 2011 Alamo Group Inc.

Page 15
Image 15
Rhino Mounts TW144 manual Crushing Hazards, When Raising or Lowering Implement