Note-------------------------------------------------------------------------------------

If you adjust the clock before turning the camera off, the camera will display the number of shots taken since the clock was set.

A zero is displayed if the clock is not set.

Using the Camera in Playback Mode

Pressing and holding the 6(Playback) button turns on the camera in playback mode, allowing you to start playback at once.

When the camera has been turned on with the 6 button, pressing the 6 button again switches playback mode to shooting mode.

About Auto Power Off --------------------------------------------------------------

If the camera goes unused for a set period of time, it automatically turns itself off to save power (Auto Power Off).

The auto power off setting can be changed (GP.77).

About Password Protection (GP.85) -----------------------------------------

If the camera is password protected, you may be prompted for a password when the camera is turned on. To use the camera, enter the password as described on P.83.

Setting the Language, Date and Time

When the power is turned on for the first time, the language setting screen appears (for the picture display language). After setting the language, go on to the date/time setting (for printing the date and time on your photos).

Setting the Language

1 Press the !" buttons to select a language.

• When the DISP. button is pressed, the language setting is canceled and the date/time setting screen appears.

If you are using the camera for the first time, read this section.

2 Press the MENU/OK button.

• The display language is set, and the date/time setting screen appears. 25

Page 27
Image 27
Ricoh G700 manual Setting the Language, Date and Time, Using the Camera in Playback Mode, Press the MENU/OK button