Ricoh G700 manual Viewing Pictures on TV, Set the television to Video mode Set the input to Video

Note-------------------------------------------------------------------------------------

To remove the DPOF settings for multiple still images, follow the same steps described above to set the number of copies to print to [0] for each image, and then press the MENU/OK button.

Viewing Pictures on TV

To view pictures on a TV, connect the camera using the supplied AV cable.

1

2

Securely connect the AV cable to the Video In terminal on the television.

•Connect the white plug of the AV cable to the audio input terminal (white) of the TV unit and the yellow plug to the video input terminal (yellow).

Turn the camera off and securely connect the cable to the camera AV output terminal.

Video Input Terminal (yellow)

Audio Input Terminal (white)

3

64

Playback Menu

Set the television to Video mode (Set the input to Video).

• For details, see the documentation that came with the television.

Press the POWER button, or press and hold the 6

(Playback) button to turn the camera on.

Caution---------------------------------------------------------------------------------

•When the AV cable is connected to the camera, the picture display and the speaker output turn off.

•Do not force the AV cable into the terminal.

•Do not apply excessive force with the AV cable connected.

•When using the AV cable, do not move the camera with the AV cable.

Note-------------------------------------------------------------------------------------

•You can connect the AV cable to the Video In terminal on your video recorder and record what you have shot to a video recorder.

•The camera supports the following video standards: NTSC and PAL. Where possible, the camera is set to the standard used in your country or region before

shipment; before connecting the camera to a device that uses a different video standard, choose the appropriate video mode (GP.79).

74