Ricoh G700 DataBar, Code, DataMatrix, Choose where barcode data are stored, Description Mode1

Camera Memo Menu

8

Barcode Type

Choose from the following options:

Available Settings	Description
Auto	The camera automatically detects the barcode type.
Linear	Use for linear barcodes. The following types are supported:
	EAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN (with add-ons),
	Interleaved 2 of 5, CODEBAR (NW-7), CODE 39, CODE 93,
	CODE 128 TYPE C, GS1-128 (EAN-128), and RSS (GS1
	DataBar).
QR Code, Micro QR	When scanning matrix barcodes, choose the option that
Code, DataMatrix,	corresponds to the type of barcode that will be scanned.
PDF417, Micro PDF417,
MaxiCode, EAN/UCC

Note----------------------------------------------------------------------------------

• The camera can read linear barcodes of up to 32 digits and matrix barcodes of up to 2400 digits.

	• Voice memos are not available with matrix barcodes.
Barcode Mode		“Software User Guide” GP.36
Choose where barcode data are stored.
	Available Settings	Description
	Mode1	The barcode is stored in the memo list as a temporary
		description for the first item. This description is overwritten each
		time a barcode is read.
	Mode2	The first barcode read is stored in the memo list as a temporary
		description for the first item, the second barcode as a
		temporary description for the second item, the third barcode
		as a temporary description for the third item, and the fourth
		barcode as a temporary description for the fourth item. These
		descriptions are overwritten in turn as new barcodes are read.
	Mode3	This option only takes effect in shooting mode. Up to fifty
		barcodes can be stored in the memo list as temporary
		descriptions for the first item. These data can be viewed in the
		camera memo dialog before shooting but can not be changed
		and are deleted after a photograph is taken.

Scan Time

Choose the maximum time the camera will wait for a barcode to be scanned. Scanning will be interrupted if a barcode is not read in the specified time.

90