Set the camera clock.
Date Settings

Card Sequence No.

When you switch SD memory cards, you can set your camera to continue consecutive numbering from the previously loaded card.

Available Settings

Description

On (Continue

Files names consist of “R” followed by a seven-digit number (e.g.,

numbering)

“R0010001.jpg”), assigned in ascending order from 0010001 to

 

9999999. When a new memory card is inserted, file numbering

 

continues from the last number used.

Off (Do not

File numbering is assigned, from RIMG0001.jpg to RIMG9999.

continue

jpg, for each SD memory card. When the file name reaches

numbering)

RIMG9999, no more data can be recorded to that card.

Note----------------------------------------------------------------------------------

This option applies only to memory cards. The names of photos in internal memory consist of “RIMG” and a four-digit number.

When images are transferred to a computer using DL-10 (GP.102), the file being transferred is renamed and saved.

Caution------------------------------------------------------------------------------

When the file name reaches RIMG9999 or R9999999, no more files can be saved. In this case, move image data from the SD memory card to the memory of the computer or a storage medium, and then format the SD memory card.GP.25

Note----------------------------------------------------------------------------------

If the battery is removed for more than three days, the date and time settings will be lost. These settings must be made again.

To retain the date and time settings, load a battery with adequate remaining

power for more than ten hours.

N(*)GP.25Language/

You can change the language displayed on the screen.

Video Out Mode (*)

You can view your still images and movies on a television screen by connecting your camera to a television with the AV cable that came with your camera. Select from NTSC (used in North America, the Caribbean, parts of Latin America, and some East Asian countries) and PAL (used in the United Kingdom and much of Europe, Australia, New Zealand, and parts of Asia and Africa). SECAM is not supported.

(*) The default setting varies depending on where you purchased the camera.

7 SetupMenu

79

Page 81
Image 81
Ricoh G700 manual Card Sequence No, On Continue, Numbering, Continues from the last number used, Off Do not