Routine Maintenance

Toner Replacement Process

Dual toner supplies are accessed from a small panel to the side of the main engine access doors. The access door to the toner refilling points can be opened without disrupting the printing process.

The dual toner supply allows for long uninterrupted printing and allows for refilling on the fly during a print run.

Users simply press in the green tab to release the toner bottle, then turn the bottle to remove it from the unit. The toner exit door is positioned at the top of the bottle upon removal, thus avoiding chances of spillage that could result from any latent toner left in the bottle.

The new bottle is first shaken, protective packaging removed, then inserted into the vacant toner bottle location and twisted until locked in place.

BERTL analysts found the process to be mess-free.

Copyright © 2006 MCA Internet, LLC dba BERTL.

Ricoh Aficio MP1350

13 November 2006

All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.

Page 11

Page 11
Image 11
Ricoh MP1350 manual Toner Replacement Process