Interface Settings

LAN Type

When you have installed the optional IEEE 802.11b interface unit, select the method of connection.

Ethernet

IEEE 802.11b

[LAN Type] is displayed when wireless LAN board is installed. If Ethernet and

 

IEEE 802.11b (wireless LAN) are both connected, the selected interface has

2

priority.

Ping Command

Check the network connection with ping command using given IPv4 address. If you fail to connect to the network, check the following, and then retry the ping command.

Make sure that “IPv4” in [Effective Protocol] is set to “Effective”.

Check that the machine with assigned IPv4 address is connected to the net- work.

There is a possibility that same IPv4 address is used for the specified equipment.

Permit SNMPv3 Communictn.

Set the encrypted communication of SNMPv3.

Encryption Only

Encryption/Clear Text

If you select to [Encryption Only], you need to set an encryption password for the machine.

Permit SSL/TLS Comm.

Set the encrypted communication of SSL/TLS.

Ciphertext only

Ciphertext Priority

Ciphertext/Clear Text

If you set to [Encryption Only], you need to install the SSL certificate for the ma- chine.

Host Name

Specify the host name.

Enter the host name using up to 63 characters.

Machine Name

Specify the machine name.

Enter the machine name using up to 31 characters.

57