Ricoh PJ S2130, PJ WX2130, PJ X2130 ECO, HDMI, Menu, Video, Power, Input, Aspect, Status, Magnify, S-Video, sources, Picture, Volume +, terminal, terminal, terminal, Auto Set, Computer1

Introduction

7	ECO	Dim the projector lamp which will
		lower power consumption and extend
		the lamp life.

Note

The “Magnify” function could not be operated, when “As- pect” is set to “Native”.

8	Volume +/-	Increase/decrease speaker volume.
9	Video	Press “Video” to choose Video in
		terminal.
10	HDMI	Press “HDMI” to choose HDMI in
		terminal.
11	Magnify	Zoom in the projector display.
12	S-Video	Press “S-Video” to choose S-Video in
		terminal.
13	Power	Refer to the “Power On/Off the Pro-
		jector” section. (See pages 22~23)
14	Menu	Press “Menu” to launch the On Screen
		Display (OSD), back to the top level of
		OSD for the OSD main menu opera-
		tion. (See page 28)

15	Input	Press “Input” to choose RGB, Compo-
		nent, S-Video, HDMI and Composite
		sources.
16	Auto Set	Automatically synchronize the projec-
		tor to the input source.
17	Picture	Select the Image mode from Bright,
		Standard and Natural.

18Keystone +/- Adjust the image to compensate for distortion caused by tilting the projec- tor.

19	Computer1	Press “Computer1” to choose Com-
		puter in/Component in terminal.
20	Computer2	This key works same as “Computer
		1” with this projector.
21	Aspect	Use this function to choose your de-
		sired aspect ratio.
22	Status	Shows the Status display menu.
		(See page 39)

18

English