Appendices

Troubleshooting

If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center.

Problem: No image appears on screen

Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.

Ensure the pins of terminals are not crooked or broken.

Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” section.

Make sure you have removed the lens cap and the projector is switched on.

Ensure that the “AV Mute” feature is not turned on.

Problem: Partial, scrolling or incorrectly displayed image

Press “Auto Set” on the remote control.

If you are using a Notebook:

1.First, follow the steps above to adjust resolution of the comput- er.

2.Press the toggle output settings. example: [Fn]+[F3]

PANASONIC, NEC => Fn+F3

HP, SHARP, TOSHIBA => Fn+F5

IBM, SONY => Fn+F7

DELL, EPSON => Fn+F8

FUJITSU => Fn+F10

APPLE =>F7

If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.

40

English