Introduction
Remote Control Battery Installation
1Press firmly and slide the battery cover off.
2Install new batteries (AAA/
R03). Ensure that you have the batteries’ polarity
3Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries.
To ensure safe operation, please observe the following precautions :■Use AAA/R03 type battery.
■Avoid contact with water or liquid.
■Do not expose the remote control to moisture or heat.
■Do not drop the remote control.
■If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.
■Risk of an explosion if battery is replaced by an incorrect type.
■Dispose of used battery according to the instructions.
■Remove batteries from remote control when not using for extended periods.
■The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting.
Remote Control Operating Range
Point the remote control toward the projector (Infra- red Remote Receiver) when pressing any button. Maximum operating range for the remote control is about 23.0’ (7m) and ±15° in front of the projector.
23.0’ (7m) Approx.15°
| Po |
| wer |
enu | En |
| t |
| er |
Input | AVMue |
o | |
| t |
| Freez |
| e |
olume |
|
19
English
English