User Controls
Default Settings 1
Power Off on No Signal
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished.
Note
If [Power on Method] is set to [Auto], then if the power is supplied when restored after a power outage, the projector will come on.
Auto Input Search
When this function is turned “On”, the projector will search for other signals if the current input signal is lost. When this function is turned “Off”, it will only search a specified connection port.
Power On Method
Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the main power switch is turned on (Auto).
Standby Energy Saving
High: Choose “High” to save standby power (less than 0.5W).
Monitor Out port will be disabled.
Low: Choose “Low” to return to normal standby mode and the
Monitor Out port will be enabled.
Lamp Power
Eco: Choose “Eco” to dim the projector lamp which will lower power consumption and extend the lamp life.
Stnd: Standard mode.
Language
Choose the multilingual OSD. Press
into the sub menu and then use the 
or 
or or key to select your preferred language. Press “ENTER” to finalize the selection.
34
English