User Controls

On Screen Display (OSD)

The Projector has a multilingual On Screen Display that allows you to make image adjustments and change a variety of set-

tings. The projector will automatically detect the source.

Note

How to operate

1.To open the OSD, press “Menu” on the Remote Control or the key- pad.

2.When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press

key to enter sub menu.

3.Use keys to select the desired item in the sub menu and

press “Enter” to adjust the settings by or key. To exit from adjusting the item, press “Enter” again.

4.If “to setting” word is shown in the setting, you can press “Enter” to enter another sub menu. Press “Menu” to close the sub menu after adjustment.

5.After adjusting the settings, press “Menu” to go back to the main menu.

6.To exit, press “Menu” again. The OSD will be closed and the pro- jector will automatically save the new settings.

If no button operation is made for 10 seconds, the OSD will be closed automatically.

Main Menu

Setting

Sub Menu

28

English