1. Insert the manual CD-ROM into the CD-ROM drive.
If you are using a computer running a Macintosh operating system, open "Manuals.htm" from the
CD-ROM root directory.
2. Select a language for the interface, and then click [OK].
3. Click [Read HTML manuals] or [Read PDF manuals], and then select the manual you want
to read.
The manual opens.
• If you are using a computer running a Windows operating system, the CD-ROM opens
automatically. However, AutoRun may not work under certain operating system settings. If this is
the case, launch “setup.exe” from the CD-ROM root directory.
Removing Manuals from Your Computer
Follow the procedure below to remove manuals from your computer.
• The following procedure is based on Windows 7 as an example. If you are using another
operating system, the procedure might vary slightly.
1. On the [Start] menu, point to [All Programs], point to [Product Name], and then click
[Uninstall].
2. Follow the instructions to remove the manual.
3. Click [Finish].
• The menu options may appear differently, depending on the options chosen during installation.
Using Manuals
23