RIDGID 700 manual Accessories, Maintenance Instructions, Tool Storage Service and Repair

No. 700 Portable Power Drive

Accessories

WARNING Only the following RIDGID products have been designed to function with the 700 Power Drive. Other accessories suitable for use with other tools may become hazardous when used on this Power Drive. To prevent serious injury, use only the accessories listed below.

Accessories For Power Drive

Model No.	Description
770	Adapter for 00-R & 00-RB
771	Adapter for 0-R
772	Adapter for 11-R
773	Adapter for 111-R
774	Square Drive Adapter
775	Support Arm for No. 700 Power Drive
B-171-X	Metal Carrying Case for No. 700 & Accessories
418	Oiler w/1 Gal. Nu-Clear Thread Cutting Oil
—	Gearhead Motor Grease

NOTE! See Ridge Tool catalog for listing of pipe sup- ports, vises and thread cutting oil.

Threaders:

Drop Head Threaders

12-R

00-R

11-R

00-RB

Geared Threaders

141 21/2″ – 4″ Pipe (NPT or BSPT)

161 4″ – 6″ Pipe (NPT or BSPT)

Contact a RIDGID distributor or consult the Ridge Tool catalog for specifications and catalog numbers.

Maintenance Instructions

WARNING

Make sure Power Drive is unplugged from power source before performing maintenance or mak- ing any adjustments.

Motor Brush Replacement

Check motor brushes every 6 months and replace brush- es when they are worn to less than 1/4″.

Lubrication

Grease face gear and bearings every 3 to 6 months depending upon the amount of use. Grease fitting is pro- vided on the gear housing.

Tool Storage

WARNING Motor-driven equipment must be kept indoors or well covered in rainy weather. Store the Power Drive in a locked area that is out of reach of children and people unfamiliar with power drives. This power tool can cause serious injury in the hands of untrained users.

Service and Repair

WARNING

Service and repair work on this Power Drive must be performed by qualified repair personnel. Tool should be taken to a RIDGID Independent Authorized Service Center or returned to the factory. All repairs made by Ridge Tool Co. service facilities are warranted against defects in material and workmanship.

WARNING When servicing this Power Drive, only identical replacement parts should be used. Failure to fol- low these steps may create a risk of electrical shock or other serious injury.

If you have any questions regarding the service or repair of this machine, call or write to:

Ridge Tool Company

Technical Service Department

400 Clark Street

Elyria, Ohio 44035-6001

Tel: (800) 519-3456

E-mail: TechServices@ridgid.com

For name and address of your nearest Independent Authorized Service Center, contact the Ridge Tool Com- pany at (800) 519-3456 or http://www.ridgid.com

10 Ridge Tool Company