ASSEMBLY
Table Extension
See Figure 9.
The table extension can be used on the left side of the miter saw. To assemble and install the table extension:
Insert socket head screw and washer into the two holes in the side of the miter saw base.
Tighten securely.
MITER LOCK HANDLE
See Figure 10.
To install the miter lock handle, place the threaded stud on the end of the miter lock handle into the threaded hole in the control arm under miter table. Turn clockwise to tighten.
DUST GUIDE
See Figure 11.
Insert the dust guide inside the exhaust port in the upper blade guard. Turn the guide so that the open end is facing down or toward the rear of the saw.
TABLE
EXTENSION
WASHER
SOCKET HEAD 
WASHER
SCREW
Fig. 9
To
Tighten
Miter |
|
| |
Lock | To |
| |
Handle | Control | ||
Loosen | |||
| |||
|
| Arm |
Fig. 10
Upper
Blade Guard
Dust
Guide
Exhaust
Port
Fig. 11
15
